Electrical problems in Upper Arlington don't sort themselves by size. A dead outlet in a kitchen and a full panel replacement are different jobs, but the same call gets both on the schedule. We cover the full range of residential and commercial electrical work across Upper Arlington and the surrounding Franklin County area.
Call (380) 289-2878 for a quote, and you'll know the rate before anything is booked.
Upper Arlington is a city of well-kept homes, many of them built in eras when a 100-amp panel and two-prong outlets were the standard. The electrical systems in those homes have often been added to over the decades without a full rethink of what the panel can carry. We work with homeowners and property owners who want the wiring brought up to where it needs to be, whether that's a targeted fix or something more thorough. With a local company, a question about the work gets a straight answer.
A commercial job in Upper Arlington runs differently from a residential one from the first call. The planning matters more, the stakes of a disruption are higher, and the work often has to fit around a business that cannot simply close for the day.
We take commercial calls that need to happen outside normal business hours. A retail space, a medical office, or a property with tenants cannot always go dark for a panel repair or a circuit run. We scope the job with that constraint in mind, confirm what hours work for the site, and plan the work so the disruption is as narrow as possible.
Some commercial jobs require isolating one section of a building while another stays in service. That involves load calculations, temporary arrangements in some cases, and a clear sequence of work that keeps the occupied portion powered. We go through that sequence before the first wire is touched so the site manager knows exactly what to expect at each stage.
A finished electrical job should leave more than working circuits. Every visit produces a clear record: what was tested, what was found, what was done, and how the circuits are labeled at the panel. That documentation matters when a home is sold, when a tenant moves out, or when a property manager needs to confirm the condition of the electrical system for a new occupant.
Labeling is part of the work, not an afterthought. A panel where every breaker is correctly identified makes every future job faster and safer, whether it's us coming back or someone else. We note any conditions that were observed but not addressed in the current visit so the owner has a full picture of where things stand, not just the part that was repaired today.
The rate for an electrical job is confirmed on the call, based on what you describe. Three things can change it once the work is underway: what the fault actually turns out to be once it's traced, what has to be opened up to reach it, and whether the existing circuit or panel has the capacity to carry the change being made.
A straightforward outlet replacement in an accessible wall is a different scope from the same outlet on a circuit that traces back to a panel that's already full. We explain those factors on the call so the estimate reflects the real job, not a best-case version of it.
Call (380) 289-2878 and describe what's happening.
The person on the phone knows the trade, can scope most jobs without a visit, and will give you a price before anything is scheduled. If the job needs a diagnostic visit first, that's confirmed upfront, not discovered afterward. The process is written out on our full list of electrical services.
A generator is only as useful as the transfer switch that connects it to the home safely. Without one, running a generator during an outage creates a back-feed risk to the utility line and to anyone working on it. We install the transfer switch, run the generator circuit, and confirm the panel can carry the load the generator will feed. The regional pattern of ice storms and severe thunderstorms makes this a job worth having done before the next outage, not during it.
A failed outlet is sometimes just a failed outlet, and sometimes it's a sign of a wiring fault further back in the circuit. We trace it either way. Outlet work in Upper Arlington's older homes often turns up two-prong ungrounded receptacles that were never updated. Replacing them with grounded outlets, or with GFCI protection where grounding isn't practical, brings those circuits in line with current standards.
Recessed lighting in a finished ceiling involves more than the fixture itself. The circuit has to be sized for the load, the housing has to be rated for the insulation contact it will see, and the wiring path through a finished space has to be planned before anything is cut. We handle the full installation, from the circuit at the panel to the trim ring at the ceiling.
GFCI protection is required in kitchens, bathrooms, garages, and outdoor locations. AFCI protection applies to bedrooms and living areas in most current code editions. Homes in Upper Arlington that were built or last rewired before those requirements took effect often lack one or both. We install them as standalone upgrades or as part of a larger visit, and we confirm what applies to the specific circuits in your home.
A Level 2 home charger runs on a dedicated 240-volt circuit pulled from the main panel. We check panel capacity before the circuit is run, and if the panel is already near its limit, that conversation happens first. The circuit is sized for the charger, the wiring is run to the garage or the location the homeowner wants, and the outlet or hardwire connection is confirmed for the specific unit being installed.
Most electrical work in Upper Arlington gets on the schedule with a single call. You describe the job, we scope it, confirm the rate, and find a time that works. We're available every day from 6:30 AM to 9:00 PM, which covers most situations without anyone needing to rearrange a full week.
For problems that won't keep, call as early in that window as you can and describe the situation. We tell you what the current schedule allows and work out the fastest path to getting someone out. A partial power loss, a breaker that won't reset, or a burning smell near a panel are the kinds of things we treat as urgent, not routine.
For tenants and businesses that need to stay open, the scheduling conversation covers more than just the date. We confirm what the work involves, which areas need access, and how long each phase is expected to take. You schedule it. We power it. Simple as that.
The utility owns the equipment up to and including the meter. Everything from the service entrance into the home is on the property owner's side. That line is where responsibility splits, and it's not always obvious from the symptoms which side a fault is on.
A partial power loss that affects only some circuits usually points to a problem on the property side: a failed breaker, a loose connection at the panel, or a fault in the wiring. A full outage that affects the whole home, especially one that affects neighbors too, is more likely a utility issue.
If a diagnostic visit confirms the fault is on the utility's side, we tell you that clearly and explain what to report to them. We don't bill for a fix we didn't make. If the fault is on the property side but the symptoms made it look like a utility issue, we scope the repair and confirm the rate before work begins. Either way, the visit ends with a clear answer about what was found and what the next step is.
We handle electrical work throughout Upper Arlington and the nearby Franklin County communities, including Marble Cliff, Grandview Heights, Riverlea, Valleyview, and Hilliard. Residential and commercial calls are both welcome across the area.
We're available every day from 6:30 AM to 9:00 PM.
Call (380) 289-2878 to check the schedule and get a rate for your job.
Upper Arlington has a significant share of homes built in the mid-twentieth century, and the wiring in those homes reflects it. Knob-and-tube wiring, aluminum branch-circuit wiring, and ungrounded two-prong outlets are all common findings. Each one has specific implications for what can safely be added to the circuit and what the remediation involves. Call us and describe what you know about the home's age and wiring, and we'll tell you what to expect from a visit.
Yes. Surface raceway is a conduit system that mounts on the wall face and routes wiring without requiring the wall to be opened. It is a practical option in finished spaces, masonry walls, or areas where opening the wall would cause more disruption than the job warrants. We confirm whether it is the right approach when we scope the job.
Most standard repairs, including outlet replacement, switch work, fixture installation, and breaker replacement, are completed in a single visit. Jobs that require a part to be ordered or that reveal a larger underlying issue may need a follow-up. We tell you on the call or during the visit if a second appointment is likely.
Usually not. High-draw equipment like welders and large compressors typically require a dedicated circuit sized for their peak load. Running that equipment on a shared general-purpose circuit risks nuisance tripping and can damage both the equipment and the wiring over time.
We explain each finding and describe the level of concern it represents. Safety issues that create an immediate risk are identified first. Code corrections and maintenance items that are not immediately dangerous are noted separately. You decide what to address and in what order, and we give you a rate for each.
Yes. We handle the same range of residential and commercial electrical work in Grandview Heights, Marble Cliff, and the other Franklin County communities near Upper Arlington. The scope, the pricing process, and the scheduling work the same way across the whole area.
Call (380) 289-2878 and describe the job, wherever it is.
Yes. We restore power to every circuit that is safe to re-energize before we leave at the end of each day. Circuits that are mid-installation and cannot be safely energized are left off, and we confirm which ones those are before we go.
Pool and pond equipment requires weatherproof circuits, correct bonding of the water and surrounding metal components, and GFCI protection on the circuits feeding the equipment. The specific requirements depend on the equipment and the installation, and we scope the work when you call.
Whole-home rewiring, knob-and-tube replacement, service-entrance upgrades, surge protection, panel work, lighting, EV chargers, generator hookups, and the everyday repairs that keep a home running.
Call Reynoldsburg Electrical Company at (380) 289-2878 and we'll scope the job, give you the rate, and get it on the schedule.
One number. One call. One electrician at your door.
Electrical work also reaches these towns: Gahanna, Westerville, Whitehall, Orange Township, Grove City.
View our coverage area list.
Most electrical problems in Upper Arlington show up as a symptom first: a breaker that won't stay reset, an outlet that stopped working, lights that flicker when the heat kicks on. The table below maps out the work we handle, who each service fits best, and what is practical to know before you call. If you have questions about a specific job, the rate and the scope are both confirmed on the phone before anything is scheduled.
| Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Outlet & Switch Installation |
| Homeowners, landlords, and small businesses needing compliant outlets or switch upgrades | GFCI coverage is required in kitchens, bathrooms, garages, and outdoor areas. We confirm what applies at your address. |
| Electrical Safety Inspections |
| Home buyers, sellers, landlords, and property managers | Older Franklin County homes may have knob-and-tube or aluminum branch-circuit wiring. We note what we find and explain the options before any work is recommended. |
| Electrical Panel & Service Upgrades |
| Homes with a 100-amp panel, frequent tripping, or plans to add an EV charger or major appliance | A panel sized for a 1970s home was not designed for today's electrical load. A service upgrade removes the capacity constraint and gives the home room to grow. |
Call (380) 289-2878 to describe your job, get the rate, and find out what the schedule allows.
(380) 289-2878